| 故障排查: |
When the power was turned ON, the Feeder Cover Interlock was closed, or when the Platen
Interlock was closed, the DADF Sensor detected paper.
Fault Code
005-905: DADF Feed Out Sensor Static Jam (Mid-H/High model)
005-906: DADF Feed In Sensor Static Jam (Mid-H/High model)
005-907: DADF Pre Regi Sensor Static Jam
005-908: DADF Regi Sensor StaticJam
005-909: DADF Lead Regi Sensor StaticJam (Mid-H/High model)
005-910: DADF Out Sensor Static Jam (Mid-H/High model)
005-911: DADF Exit Sensor Static Jam
005-915: DADF APS Sensor 1 Static Jam
005-916: DADF APS Sensor 2 Static Jam
005-917: DADF APS Sensor 3 Static Jam
005-920: DADF Skew Detect Sensor Static Jam (Mid-H/High model)
Cause/Action
1. Check the applicable sensor for remaining paper, foreign matter, the Actuator for return
failure, contamination on sensor, and etc.
2. Check the applicable sensor for operation failure.
DADF Feed Out Sensor (DC330[005-205]) (PL 54.9)
DADF Feed In Sensor (DC330[005-204]) (PL 54.8)
DADF Pre Regi Sensor (DC330[005-206]) (PL 54.9, PL 57.5)
DADF Regi Sensor (DC330[005-110]) (PL 54.9, PL 57.5)
DADF Lead Regi Sensor (DC330[005-207]) (PL 54.9)
DADF Out Sensor (DC330[005-208]) (PL 54.9)
DADF Exit Sensor (DC330[005-209]) (PL 54.9, PL 57.7)
DADF APS Sensor 1 (DC330[005-218]) (PL 54.9, PL 57.5)
DADF APS Sensor 2 (DC330[005-219]) (PL 54.9, PL 57.5)
DADF APS Sensor 3 (DC330[005-220]) (PL 54.9, PL 57.5)
DADF Skew Detect Sensor (DC330[005-192]) (PL 54.9)
3. If no problem is found, replace the DADF PWB. (PL 54.3, PL 57.4) |
