| 故障排查: |
Check the following:
The Regi Sensor (DC330 [077-103]) for operation failure. (PL 14.4)
The Takeaway Motor 1 (DC330 [077-050]) for operation failure. (PL 15.2)
The Takeaway Motor 2 (DC330 [077-051]) for operation failure. (PL 15.2)
The Tray 2 Feed/Lift Motor (DC330 [072-001] (Feed)) for operation failure. (PL 9.9)
The T/A Roll 2, MSI T/A Roll, Tray 2 Feed Roll, Retard Roll, and Nudger Roll for contamination, wear, and transportation failure due to deterioration.
The Drive Gear for wear and damage.
The LH Unit for improper latching.
Transportation failure due to foreign matter on the paper path.
Usage of out of spec paper.
The MSI TA Assembly for improper installation. (PL 13.1)
The Regi Transport Assembly for an improper installation. (PL 15.1)
If no problem is found, replace the Motor Drive PWB. (PL 18.2, PL 18.5) |
