| 故障排查: |
Check the following:
The IIT Regi Sensor (DC330 [062-212]) for operation failure. (PL 1.4, PL 1.10)
The Carriage Motor (DC330 [062-005/006] (Scan Direction/Return Direction)) for operation failure. (PL 1.4, PL 1.10)
The Full Rate/Half Rate Carriages for improper positioning. (ADJ 1.1.1, ADJ 1.1.2)
The Carriage Cable for winding failure, contamination on the rail, and foreign matter on the rail.
The Carriage operation for mechanical loading.
If no problem is found, replace the following parts in sequence. However, each time a parts is replaced, check whether the Fail is still occurring and return the part if it has no problems.
IIT Trans PWB (PL 1.3, PL 1.9)
Controller PWB (PL 35.2) |
