| 故障排查: |
Procedure
Plug in the power plug.
Is the voltage between the AC Drive PWB J6-1 and J6-3 100 VAC or 110/208 to 240 VAC?
Y N
Go to 2.2.2.2 (1 Power Cord Type) AC Power FIP , or 2.2.2.2 (2 Power Cords Type) AC Power FIP.
Turn OFF the power and check the connection between the AC Drive PWB J6-1, 3 and the IH Power Supply J30-1, 3 for open circuit and poor contact.
If no problem is found, replace the following parts in sequence: However, each time a parts is replaced, check whether the Fail is still occurring and return the part if it has no problems.
IH Power Supply (PL 18.1, PL 18.4)
Controller PWB (PL 35.2) |
