| 设备分类: |
复印机 » 富士胶片复印机 » Apeos C7070 / C6570 / C5570 / C4570 / C3570 / C3070 |
| 故障代码: |
005-160 |
| 故障解释: |
DADF Tray Lift Up Fail on Running (Document Set) (Mid-H/High model) |
| 故障原因: |
Description
The DADF Level Sensor does not turn ON within the specified time after the Tray that had been loaded with the document has started to rise. Or, the DADF Bottom Sensor does not turn OFF. (When detected during Run, Stop, or Purge) |
| 故障排查: |
Check the following:
The DADF Level Sensor (DC330 [005-203]) for operation failure. (PL 54.8)
The DADF Tray Motor (DC330 [005-051]) for operation failure. (PL 54.5)
The DADF Bottom Sensor (DC330 [005-202]) for operation failure. (PL 54.6)
The Drive Gear of the DADF Tray Motor for wear and damage, as well as the Torque Limiter for damage.
If no problem is found, replace the DADF PWB. (PL 54.3) |
| 说明备注: |
- |
