[Mid-H/High model]
Due to document skew, the DADF Pre Regi Sensor turned ON earlier than the designated
timing after Skew Sensor On. or, the DADF Pre Regi Sensor did not turn ON within the specified time.
[Low/Mid-M model]
Due to document skew, the DADF Pre Regi Sensor turned ON earlier than the specified timing. or, the DADF Pre Regi Sensor did not turn ON within the specified time.
故障排查:
Check the following:
The document guides for improper placement.
Whether the Nudger Roll is in uniform contact with the document placement tray.
Whether the Feed Roll and Retard Roll are in uniform contact with the document.
Whether the document is badly curled.
Whether the combination is out of the size specifications. (Mixed Size)
