Description
After the DADF Lead Regi Sensor ON, the DADF Regi Sensor did not turn OFF within the specified time.
The DADF Out Sensor turned ON before the DADF Lead Regi Sensor has turned ON.
故障排查:
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the surface of the Regi Roll and Platen Roll.
Wear on the surface of the Regi Roll and Platen Roll.
The DADF Lead Regi Sensor (DC330 [005-207]) for operation failure. (PL 54.9)
The DADF Out Sensor (DC330 [005-208]) for operation failure. (PL 54.9)
The DADF Platen Motor (DC330 [005-031]) for operation failure. (PL 54.10)
The DADF Regi Motor (DC330 [005-021]) for operation failure. (PL 54.10)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 54.3)
