Description
After the Pre Regi Sensor OFF at Scan operation, the DADF Regi Sensor did not turn OFF within the specified time
故障排查:
Check the following:
Transportation failure due to foreign matter on the document path.
Foreign matter on the surface of the Regi Roll and Exit Roll.
Wear on the surface of the Regi Roll and Exit Roll.
The DADF Regi Sensor (DC330 [005-110]) for operation failure. (PL 57.5)
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 57.5)
The DADF Regi Motor (DC330 [005-012]) for operation failure. (PL 57.12)
The DADF Feed Motor (DC330 [005-002]) for operation failure. (PL 57.12)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 57.4)
