Description
After the Read operation has started (the DADF Regi Motor has turned ON), the DADF Lead Regi Sensor did not turn ON within the specified time .
After the DADF Regi Sensor ON, the DADF Lead Regi Sensor did not turn ON within the specified time.
The DADF Lead Regi Sensor turned ON before the DADF Regi Sensor has turned ON.
故障排查:
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the surface of the Regi Roll and Pre Regi Roll.
Wear on the surface of the Regi Roll and Pre Regi Roll.
The DADF Lead Regi Sensor (DC330 [005-207]) for operation failure. (PL 54.9)
The DADF Regi Motor (DC330 [005-021]) for operation failure. (PL 54.10)
If no problem is found, replace the DADF PWB. (PL 54.3)
