故障代码查询
| 设备分类: |
复印机 » 富士胶片复印机 » Apeos C7070 / C6570 / C5570 / C4570 / C3570 / C3070 |
| 故障代码: |
005-122 |
| 故障解释: |
(Mid-H/High model) DADF Simplex/Side 1 Pre Regi Sensor On Jam |
| 故障原因: |
Description
After the DADF Feed Out Sensor ON, the DADF Pre Regi Sensor did not turn ON within the specified time.
After Pre Regi operation has started, the DADF Pre Regi Sensor did not turn ON within the specified time.
The DADF Pre Regi Sensor turned ON before the DADF Feed Out Sensor has turned ON. |
| 故障排查: |
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the surface of the Feed Roll, Nudger Roll, and Takeaway Roll.
Wear on the surface of the Feed Roll, Nudger Roll, and Takeaway Roll.
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 54.9)
The DADF Feed Motor (DC330 [005-004]) for operation failure. (PL 54.5)
The DADF Pre Regi Motor (DC330 [005-013]) for operation failure. (PL 54.10)
The DADF T/A Clutch (DC330 [005-087]) for operation failure. (PL 54.10)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 54.3) |
| 说明备注: |
- |
注册或关注公众号后查看更多内容
您需要 登录 才可以下载或查看，没有账号？我要加入
×
|
|
